Sea gull lighting 8236391S Instrucciones De Instalación página 2

Install the Fixture
1A
BRACKET SCREW
1 Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
2
3 Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Secure the fixture to the post with post screws.
4
Install the glass by sliding them into the fixture, then secure them in place using the brackets and bracket screws.
5
Place the cover onto the studs on the fixture and secure it in place with the cap nuts.
6
COVER
6
CAP NUT
BRACKET
STUD
3
POST
6
5
5
4 4
1
2
GLASS
FIXTURE
POST SCREW
2