Horizon Global 76547 Instrucciones De Montaje página 4

1. Remove screws from fascia - Use T15 torxbit to remove (2) screws (with clips) from the bottom of the fascia. NOTE: If underbody panel is present, use M10
socket to remove (3) plastic nuts from the forward edge of the underbody panel. Use a T25 remove (4) screws from the rearward edge of the underbody panel.
Return to vehicle owner.
2. Loosen wheel well liner – Use T25 torxbit to remove (2) screws from bottom of driver side wheel well liner. Use T25 torxbit to remove (4) screws from the driver
side wheel well liner. Use T25 torxbit to remove (1) screw from inside wheel well liner. Repeat this process for passenger side.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 18 76547NP 10-1-21 Rev. A