Method 2. Connecting Wirelessly; Connecting A Tv Via Bluetooth - Samsung HW-N450 Manual Del Usuario

Ocultar thumbs Ver también para HW-N450:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Method 2. Connecting Wirelessly

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
The initial connection
1. Press the
PAIR button on the remote control to enter the "BT PAIRING" mode.
(OR)
a. Press the
Change "BT" to "BT READY".
b. When "BT READY" appears, press and hold the
of the Soundbar for more than 5 seconds to display "BT PAIRING".
2. Select Bluetooth mode on the TV. (For more information, see the TV's manual.)
3. Select "[AV] Samsung Soundbar Nxxx N-Series" from the list on TV's screen.
An available Soundbar is indicated with "Need Pairing" or "Paired" on the TV's Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected, [TV Name] → "BT" appears on the Soundbar's front display.
4. You can now hear TV sound from the Soundbar.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. "[AV] Samsung Soundbar Nxxx N-Series") appears
in the list, delete it.
• Then repeat steps 1 through 3.
(Source) button on the right side panel and then select "BT".
ENG - 11
OR
(Source) button on the right side panel

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido