Publicidad
Enlaces rápidos
Step One
Infill safety cord installation
Step Three A
Infill Drilling Guidelines
INFILL DRILLING & FIXING TO CMS - ONLY USING SUPPLIED SCREWS
FOR INFILL BODY LENGTH UP TO 1.5M
100
100
6.5 (4)
O 6.5
O 3.5
Infill cover
“V” Groove indicator
on extrusion will
centralise drill bit
Drill 2 x 3.5mm diameter holes
equally spaced through infill
cover along “V” groove
77 crs
“V” groove indicator
Use a centre punch
before drilling
Step Two
Infill safety cord installation
Infill body
Safety cord
M4 flat washer
M4 x 8 screw taptite
M3 x 10 machine screw
Infill cover
Safety cord
M4 flat washer
M3 Nut
Step Three B
Infill Drilling Guidelines
INFILL DRILLING & FIXING TO CMS - ONLY USING SUPPLIED SCREWS
FOR INFILL BODY LENGTHS FROM 1.5M TO 3.0 M
100
=
6.5 (8)
SECURELY ATTACH BOTH SAFETY CORDS
FROM INFILL COVER TO INFILL BODY
Infill cover
100
=
=
“V” groove indicator
Use a centre punch before drilling
Infill body
Publicidad
Manuales relacionados para HOLOPHANE PRISMASHIELD ELITE INFILL
Resumen de contenidos para HOLOPHANE PRISMASHIELD ELITE INFILL
- Página 1 Step Two Infill safety cord installation O 6.5 O 3.5 Infill body Step One SECURELY ATTACH BOTH SAFETY CORDS FROM INFILL COVER TO INFILL BODY Infill safety cord installation Safety cord Infill cover M4 flat washer M4 x 8 screw taptite M3 x 10 machine screw “V”...
- Página 2 Es requisito esencial que las instrucciones de instalación sean seguidas rigurosamente. Las instrucciones de instalación de la lámpara han de ser seguidas, tanto si la lámpara es suministrada por Holophane como si no.Holophane no se hace responsable de daños ocasionados a personas o cosas como consecuencia de una mala instalación.