To reverse refrigerator handle
1. Remove the handle by removing the screw covers and
screws.
2. Remove the hole covers on opposite side of the door.
3. Install the handle on opposite side by fastening the
screws and then fitting the screw covers.
4. Insert the hole covers to the holes on the side of the
door.
TIPS FOR SAVING ENERGY
For the most energy efficient use of your appliance:
• Ensure your freezer has adequate ventilation as recommended in the installation instructions.
• Allow warm food and drinks to cool down before placing in the appliance.
• Keep door openings to a minimum.
• Open the appliance as briefly as possible.
• Ensure that the freezer door is always closed properly.
OPERATING NOISES
Normal noises
• Motors are running.
• Refrigerant is flowing through the tubing.
CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Disconnect the mains plug from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning reconnect and adjust the temperature control knob as desired.
6. Put the food back into the appliance.
12
12