Lcd Display - Duronic KS100 Manual De Instrucciones

Ocultar thumbs Ver también para KS100:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Features
Capacity: 5000g / 11lb:0.4oz / 5000ml
Division: 1g / 1ml / 0.1oz
Weight unit: g /oz/ lb'oz / ml
Minimal weight: 2g
Function key:
Display: LCD with white backlight
Battery: 2xAAA
Dimension: 180x180x57mm
Auto off function

LCD Display

Function Indication
-
: Press
to switch on to enter weighing mode
- Press and hold
for about 2 seconds to switch off
- Press
to make tare function in weighing mode
-
: Press
to select desired unit in weighing mode.
6
Operating Instructions
1. Select unit before use
a. Open the battery door at the back of the scale.
b. Put the batteries in and ensure +/- terminals are correct. The LCD
will be on as below.
c. Close the battery door and put the scale on flat table. The scale will
enter weighing mode automatically.
Note: If there is a weight shown on the LCD, press
d. Press
to select desired unit.
Note: When finishing selecting unit, you may start to weigh according to the
weighing procedure below. If there is not any operation and the weight is
steady in weighing mode, the scale will turn off automatically after about 45
seconds.
to set it to zero.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido