Using The Uwf; About Uwf; Compatible Models; Performing Wireless Lan Setup On The Av Receiver - Onkyo UWF-1 Manual De Instrucciones

Using the UWF-1

About UWF-1

A wireless LAN (WLAN) is a local area network that
relies on wireless communication.
To achieve a wireless network connection, you will
need the following components:
❑ Access point
Also known as the base station, it links your network-
capable AV receiver (wireless client) with a PC or
network. Access points fall into two categories: the
bridge type that only performs data relay in a local
area network, or the router type that has a built-in
router functionality.
❑ Wireless adapters
Sometimes known as dongles, wireless adapters are
extension devices that provide wireless network
functionality when connected to a PC. There are
several types of adapters, including PC cards and USB
adapters. Connecting the UWF-1 wireless adapter to
the USB port of a network-capable AV receiver lets
you use your AV receiver as a wireless client (wireless
terminal) and connect it to a PC or to the Internet.
8
En-

Compatible models

Compatible with new-series (TX-NRxx9 and higher)
Onkyo AV receivers. For further details, visit the
Onkyo web site. You can find the home page address
on the back of this manual.
Performing wireless LAN setup on the AV
receiver
To achieve a wireless network connection, it is
necessary to perform the wireless LAN setup. The
setup can be done either automatically or manually.
Note
• Do not connect any other wireless adapter than the UWF-
1 to the USB port of your network-capable AV receiver, as
other wireless USB adapters are not supported.
• Depending on your connection and the AV
receiver's functionality, menus won't be displayed
on screen. In this case, use the AV receiver's display
to make the settings.
• The wording of displayed items varies according to
the AV receiver's functionality.
Tip
• Press RETURN to go back one screen.