Troubleshooting Tips - HMDX RECHARGE Manual De Instrucciones E Información De Garantía

Power Source (Fig. 1)
This unit is supplied with an AC adapter; take the following steps to connect the
adapter.
1. Unwind the power cord of the AC adapter to its full length.
2. Connect the AC adapter to the Input Jack (Fig. 1).
3. Plug the AC adapter into an outlet (100v–240VAC 50/60 Hz). Connecting this
system to any other power source may cause damage to the system. For
sufficient ventilation, keep other objects at least 4 inches away from the unit.
4. To switch the unit off completely; unplug the AC adapter from the wall outlet.
Charging
1. Plug in the unit. The Power Light on the front of the device will turn on.
2. Connect the USB end of the device's cable into one of the 3 USB charging
ports.
Note: You can use the iPad charging port on the back of the unit for all compatible
devices.
Note: For quicker charging results use the iPad charging port on the back of the
unit when charging an iPad.
Retractable Mat (Fig. 3)
To use the retractable mat simply pull the rubber tab on the front of the product and
pull the mat out.
Place device on mat while charging.
To retract the mat, push the retractable mat button and the mat will automatically
retract.
4
Compatibility
iPad, iPad2, iPad (3rd generation)
iPhone 4S, 4, 3GS, 3G
iPod Touch (1st generation, 2nd generation,3rd generation and 4th generation)
iPod Nano (2nd generation,3rd generation, 4th generation, 5th generation and 6th
generation)
Most E-Readers
Most Bluetooth Headsets
Maintenance
To Store
You may leave the unit on display, or you can store it in its box in a cool, dry place.
To Clean
Use only a soft dry cloth to clean the enclosure of the unit. NEVER use liquids or
abrasive cleaner to clean.
Modifications not authorized by the manufacturer may void users authority to oper-
ate this device.

Troubleshooting Tips

Devices not charging • Check power connection.
• Check charging cable connection
• Use cable provided with device
5