Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
MPLO215-R
Pullout Lid Organizer
Minimum Opening:
11-1/2" minimum
Opening
1. Make sure the cabinet hinge will not
interfere with organizer when installed
4. Align front of slide with inside lip of cabinet
5. Screw slide frame into cabinet with 4
included screws
Installation Instructions
Included:
Tools Needed:
5/8" Screw (x4)
2. Release slide by pushing the black trigger
UP on the LEFT side and DOWN on the
RIGHT side
6. Align and reinsert organizer into slide
frame
To Install on Adjustable Shelf:
Use shelf brackets to fix shelf position
Phillips
Screw Driver
Tape
Measure
(optional)
3. Remove organizer from slide frame by
pulling forward
7. Push organizer into slide frame until it
CLICKS into place
Shelf
Bracket
(x4)
½" Screw (x8)
Publicidad
Resumen de contenidos para HARDWARE RESOURCES MPLO215-R
- Página 1 MPLO215-R Installation Instructions Pullout Lid Organizer Minimum Opening: Included: Tools Needed: To Install on Adjustable Shelf: Use shelf brackets to fix shelf position 5/8” Screw (x4) Phillips Shelf Screw Driver Bracket (x4) 11-1/2" minimum Opening Tape Measure ½” Screw (x8) (optional) 1.
- Página 2 ESP: Instrucciones de instalacion MPLO215-R Organizador de retiro para Tapas FR: Instructions d’installation Organisateur coulissant pour couvercles ESP: Abertura mínima ESP: Incluido ESP: Herramientas necesarias ESP: Para instalar el estante ajustable: FR: Ouverture minimale FR: Inclus FR: Outils nécessaires Utilice soportes de estante para fijar la posición del estante FR: Pour installation sur la tablette réglable :...