Genius MAXFIRE PANDORA Manual Del Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
1. System Requirements
Pentium class CPU-500 MHz or higher.
Available USB port
Microsoft Windows® 98/2000/ME/XP
2. Hardware Overview
Check the diagram below to familiarize yourself with each button function on your game
pad.
Eight stylish functional buttons
A 8-way D-pad for defined digital control
Turbo on/off buttons
USB cable inside bottom of game pad
3. Hardware Installation
1. Plug the USB cable game pad connector to the USB port or extension USB hub of
your computer and make sure it is firmly connected.
2. After the USB cable game pad is connected, the "Find a new Hardware" dialog box
appears; if the software installation is completed then the Windows Driver is loaded
automatically and is OK for game-play.
4. Set-up in Windows System
After setting up the hardware, Windows® OS will auto detect the USB device. Follow the
instructions below to configure your game pad.
1. Select Start \ Setting \ Control Panel \ Game Controllers or Joysticks.
2. Select the right game pad "USB-cable game pad "from the Game Controller Menu.
3. Click on "Properties "and then "Calibrate".
4. When the "Controller Calibration" page appears, you can calibrate the game pad
button functions. If it doesn't work properly, you have to configure it using the ''Setting
page'' as below:
a. Set the game pad center position. Then press any game pad button.
b. Select the range of motion. Turn the mini stick 2 or 3 turns, then press any game
pad button.
c. Confirm the center. Press any game pad button.
d. Click on "Finish "and go back to the Game Controller Properties page.
e. Click on "Test page ". Turn the D-pad and press each functioning button on
your game pad to test the adjustments. If all functions are correct, then click on
"OK".
* If the device does not work properly, it means that the above calibration is not
complete. Please repeat the above calibration again till the calibration procedure is
correct.
5. Go back to Game Controller "Properties" page, and click on "OK" or "Apply" to
complete the calibration procedure.
Now you are ready to start up the game software for hours of fun.
5. Important
1. Make sure your software supports the Game Controller/ Joystick.
2. Not every game requires all functioning buttons (8 buttons in total), if you find some
buttons do not work inside the game, please check the game settings again.
3. The function of the game pad buttons may vary in different games. Before proceeding
to the game settings from OPTION inside the game, always read your game's
manual carefully to set the best game settings.
4. Your USB game pad needs little care and service. You may clean it with a damp
cloth periodically. Do not use abrasive cleaners of any type and do not spray liquid
cleaners directly on your game pad. Any fluid leaks inside the joystick may cause
unexpected damage.
1
English

Publicidad

Tabla de contenido
loading

Tabla de contenido