Cloogy HOME Guía Rápida De Instalación página 22

16
Connect the appliance to the Power Plug.
17
The first communication between the Power Plug and the
Cloogy
®
period no data is available on the portal, bring the Power Plug
closer to the Hub and wait a few minutes. If this procedure
does not work, check if the Power Plug is paired:
• Enter the Cloogy
• Click on the Devices tab
• If the status of the Power Plug is red (not paired) it is
necessary to pair it. Check the Pairing section (page 21).
If the problems persist please contact our Customer
Support Service.
18
Your Display shows, by default, the room temperature. To
view information about your consumption use the «Up»,
«Down», «Enter» and «Esc» buttons:
Up e Down - Browse through the Sensors connected to your
Cloogy
®
Enter - Using the «Up» and «Down» buttons choose,
for the selected Device how you want to view the data:
real-time data or cumulative data (per day or per month);
measurement unit or Euros.
Esc - Exit the menu.
20
portal might take up to 30 minutes. If after this
Portal and click on Settings
®
kit Hub.