Package Contents; Connecting To A Network - Asus RP-AC53 Guia De Inicio Rapido

Package contents

RP-AC53 Dual-band Wireless Repeater
Warranty Card
Quick Start Guide
NOTE: If any of the items is damaged or missing, please contact
your retailer.
A quick look
1) Power On/Off switch
2) Reset button
3) WPS button
4) Power LED
On: RP-AC53 is plugged to a
power outlet and powered on
Off: RP-AC53 is unplugged from a
power outlet or powered off
5) Ethernet LED
6) 2.4 GHz LED
7) 5 GHz LED
Setting up the Repeater
Turning the Repeater on
1. Place RP-AC53 near your Router/AP and plug it to a power outlet.
Press the power switch to ON.
2. Wait until the power LED turns solid green and Wi-Fi LEDs stop
blinking, indicating that RP-AC53 is ready to connect to the
parent AP.

Connecting to a network

Select one of the following ways to connect the Repeater
to a network.
Method One: Using WPS (Wi-Fi Protected Setup)
1. Press the WPS button on the router/AP.
2. Press the WPS button on the bottom of RP-AC53 for
more than five (5) seconds, until the LEDs start to blink.
NOTE: Refer to the router's manual for the location of the
WPS button.
3