Proline MINITT Manual De Instrucciones página 6

OPERATION
1. Plug the toaster into the mains socket.
2. Put the bread slice/slices into the slot at the top of the appliance.
∗ Make sure the crumb tray is closed with a clip.
3. Turn browning control knob to the desired setting.
∗ There are 5 settings: "1" for the lightest setting, "5" for the darkest
setting.
∗ You will need to experiment with this setting depending on your
browning colour preference and the thickness of the bread.
4. Press carriage lever down vertically until it locks in the down position to
switch the appliance on.
∗ The red indicator light will illuminate and the toasting cycle begins.
∗ Toasting process can be terminated at any time by pressing the stop
button. The carriage lever will spring up.
5. Once the bread has been toasted to the selected setting, the carriage
lever will automatically spring up to switch off the appliance and the
bread will automatically pop up.
∗ During toasting, you may observe the toasting colour, if the browning
setting is higher than required, press the stop button to stop the
operation at any time.
6. Remove the bread from the slot.
CLOSE
EN-6