Preparation - Kobalt SGY-A13 Manual Del Usuario

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product.
Check for proper lens and helmet fit.
Make certain the front cover lens is properly attached. Remove protective film.
Make certain the lens is clean and there is no dirt or spatter covering the 2 sensors at the
front of the filter cartridge.
Inspect all parts for signs of wear or damage. Replace any scratched or cracked parts
prior to use.
Estimated Assembly Time: 2 minutes
5