[]
Maintain power tools. Check for misalignment
or
[]
binding
of moving parts, breakage
of parts, and any
other condition
that may affect the power tool's
operation,
if damaged,
have the power tool repaired
[]
before use. Many accidents are caused by poorly
maintained power tools.
[] Keep cutting
tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
[] Use the power tool, accessories
and tool bits etc.,
[]
in accordance
with these instructions and in the
manner
intended for the particular
type of power
tool, taking into account
the working
conditions
and the work to be performed.
Use of the power
tool for operations different from those intended could
result in a hazardous situation.
BATTERY
TOOL USE AND CARE
[] Ensure the switch
is in the off position
before
inserting battery
pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
[] Recharge only with the charger
specified
by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically
designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery
pack is not in use, keep it away from
other metal objects
like paper clips, coins, keys,
nails, screws,
or other small metal objects
that can
make a connection
from one terminal
to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions,
liquid may be ejected
from the battery, avoid contact.
If contact
acci-
dentally
occurs, flush with water.
If liquid contacts
eyes, additionally
seek medical help. Liquid ejected
from the battery may cause irritation or burns.
SERVICE
[]
Have your power tool serviced
by a qualified
repair
person using only identical
replacement
parts. This
will ensure that the safety of the power tool is main-
tained.
,_,
WARNING!
To reduce the risk of injury, user must
read instruction manual.
[] When servicing
a power tool, use only identical
replacement
parts. Follow instructions in the Main-
tenance section
of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions
may
create a risk of shock or injury.
[] Hold power tools by insulated gripping
surfaces
when performing
an operation
where the cutting
tool may contact
hidden wiring
or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
[] Wear hearing protection
with impact wrenches.
Exposure to noise can cause hearing loss.
[] Know your power tool. Read operator's
manual
carefully.
Learn its applications
and limitations, as
well as the specific
potential
hazards related to this
power tool. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
[] Always wear eye protection
marked to comply with
ANSI Z87.1. Failure to do so could result in objects be-
ing thrown into your eyes, resulting in possible serious
injury.
[] Protect your lungs. Wear a face or dust mask if the
operation
is dusty. Following this rule will reduce the
risk of serious personal injury.
[] Protect your hearing. Wear hearing protection
during extended
periods
of operation.
Following this
rule will reduce the risk of serious personal injury.
[] Use this tool only with impact rated sockets
and
adaptors.
[] The metal casting
on the front of this tool gets hot
during use. Avoid touching this surface while operat-
ing or changing sockets.
[] Battery tools do not have to be plugged
into an
electrical
outlet; therefore,
they are always in
operating
condition.
Be aware of possible
hazards
when not using your battery tool or when changing
accessories.
Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
[] Do not place battery tools or their batteries
near
fire or heat. This will reduce the risk of explosion and
possibly injury.
[] Do not crush, drop or damage
battery pack. Do
not use a battery
pack or charger
that has been
4 - English