Timer Mode - Kenwood IH470 Serie Manual De Instrucciones

When the time has been set, it will
flash four times and then the display
will remain steady, confirming that is
set. Alternatively just press 'time' again
to confirm. After that the clock will
count down; and the display will show
alternately the remaining time and the
set power or temperature.
The maximum cooking time which
can be set is 3 hours.
Once the cooking time has been set,
the timer will begin counting down
after 5 seconds.
During set-time cooking, pressing +
or - or turning the control knob will
change the power or temperature and
will cancel the set time.
After fixed time cooking has
been completed, the "on/off"
button needs to be pushed
before more cooking can be
done.
6 Turbo function.
Pressing 'turbo' during cooking
boosts the cooking power to 2100
watts for 30 seconds ; after which
the hob changes back to the earlier
set power or temperature.
Notes: When the induction hob is
working, there will be a high frequency
intermittent sound and the fan will
operate. This is normal.
Once the pan is taken off the hob,
the hob stops heating immediately.
The existing display/settings will flash.
If the pan is not put back within 60
seconds, the hob will turn off
automatically and will be on standby
mode.
7 Press the on/off button when you
have finished cooking, the cooker will
stop heating and return to standby
mode.
• The fan will continue to operate after
the appliance has been switched off.
• As this induction hob operates slightly
differently to a traditional hob, some
adjustments to the expected cooking
times and temperatures may be
necessary to achieve the desired
results.
hints
• To reduce the cooking time, you can
turn the power control to the max
position when you turn the appliance
on. After a short time you can set the
power control to the required position.
• After a short period of use, experience
will teach you which setting is the right
one for your needs.
• Pan contents heat more quickly with
an induction hob.

timer mode

Note: if the timer is not set, the
hob will operate for a maximum
of 2 hours continuously and will
then change to standby mode.
The timer can only be set after an initial
power level has been selected.
Using the touch control buttons -
touch the button firmly with the
flat part of the fingertip. To
change the time by several
minutes touch the button for
each minute of adjustment.
1 To set the timer press the '+' or '-'
button. A pre-set time of 30 minutes
will appear on the timer display. To
amend this pre-set time press the '+'
or '-' to change the time by 1 minute
per press. To quickly adjust the time in
10 minutes increments, hold your finger
on the '+' or '-'. The timer range is 1
minute to 3 hours.
•
The timer can be adjusted at any time
by pressing the '+' or '-' buttons and
then adjusting the time.
•
The timer function can be cancelled at
any stage by re-setting the time to '0'
or by pushing the menu button.
2 Once the cooking time has been set,
the timer will begin counting down after
5 seconds.
When the set time is complete, the
3
beep will sound and the power will
change to standby mode.
4 After the timer cooking has been
completed; the hob will turn off
automatically and will be on
standby mode.
5