User Instructions - Mission M-CUBE Manual De Instrucciones

m-cube sats manual 03-11-04.qxd 15/12/2004
S T A G E 1
Mounting
the M-Cube
satellite to
the wall
08:23 Page 6
S T E P 1 S T E P 2
Offer the mounting bracket to the wall Attach the wall bracket to the
and mark the positions for 2 mounting bracket by sliding down
mounting points. Having selected vertically.
fixings appropriate to the mounting
surface, drill 2 holes to accommodate
the fixings.
Attach the mounting bracket
to the wall using appropriate
countersunk screws (not supplied).
Screws/fixings not supplied
S T E P 3 S T E P 4
Loosen the locking mechanism screw Attach the satellite and connector to
using the Allen key provided. Set the the wall bracket using the M6 screw
pitch of the wall bracket arm as provided. Before tightening fully,
desired, and re-tighten the locking swivel the satellite to the desired
mechanism screw. angle.
Note that the connector between the
satellite and bracket has a locating
device that will only fit one way.