Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Helpful Hints
•
Always operate the blender with the
blender cover on.
•
Always hold the bender jar with one
hand while processing.
•
To ensure proper blending and to
prevent overflow, add ingredients to the
blending jar a little at a time.
•
Never fill blender jar more that 3/4 full -
the blade action will cause the
ingredients to rise in the blender jar.
Blend large quantities in several
batches.
•
Unless your recipe says otherwise, pour
liquid ingredients first into the blender jar
before solid ingredients. The liquid will
help the processing go much faster and
allow the blender to operate at a more
efficient rate.
•
Do not use blender continuously for an
extended amount of time, (no more than
four (4) minutes running time without
cooling down).
•
Do not remove the blender jar from the
power base while the motor is running.
•
To prevent the possibility of severe
injury or damage to the appliance,, keep
hands and utensils out of the blender jar
while processing. A scraper may be use
only when the blender is not working.
•
Do not store food or beverages in the
blender jar.
•
Even though the blender is a versatile
appliance, it will not mash potatoes,
beat egg whites, extract juice from fruits
or vegetables, grind raw meat or knead
dough.
•
When grating hard cheese, cut into
small cubes and put small amounts into
the jar. Cover the jar and process on
high speed. Do not overload. Use the
pulse button and process until it reaches
the consistency that you desire.
•
When processing solids, always cut
food into 1"-2" sized pieces before
blending.
•
Use extreme caution when
processing hot foods to avoid
accidental scalding or burns. When
processing hot foods, always remove
the measuring cap from the blender
cover before beginning.
Maintenance
This blender requires no maintenance. It
contains no user-serviceable parts inside
the motor housing. Do not remove the
motor housing cover. Contact EURO-PRO
Operating LLC if this product needs
servicing.
Cleaning
NEVER IMMERSE POWER BASE IN
WATER OR ANY OTHER LIQUID.
1. Turn blender "Off".
2. Unplug blender from electrical outlet.
3. Remove the blender jar from the power
base.
4. Disassemble the blender jar and wash
in warm soapy water. Use extreme
caution when handling the blade
assembly.
5. Wipe the power base with a damp
cloth. Dry completely with a soft cloth.
Storage
Caution: Always assemble blender
parts correctly before storing the power
base.
1. Unplug and clean unit.
2. Wrap power cord counterclockwise
underneath the power base. (Fig. 5)
Note: Do not store the blender with the jar
cover in place.
Fig. 5
5
Model KB305E
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized for normal
household use.
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, return the complete appliance and accessories, freight prepaid. For Customer
Service support, call 1(800) 798-7398 or visit our website www.euro-pro.com. If the appliance is
found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace
it free of charge. Proof of purchase date and $12.95 to cover the cost of return shipping and
handling must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to
any unit that has been tampered with or used for commercial purposes. This limited warranty does
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging
or mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package "ATTENTION
CUSTOMER SERVICE". We are constant;y striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
OWNERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and mail the product registration card within ten (10) days of purchase in order to
validate the foregoing Limited Warranty. The registration will enable us to contact you in the unlikely
event of a product safety notification. By returning this card you acknowledge to have read and
understood the instructions for use, and warnings set forth in the accompanying instructions.
RETURN TO EURO-PRO Operating LLC, 4400 Bois Franc, St-Laurent, Qc, H4S 1A7
Model KB305E
_______________________________________________________________________
Appliance model
_______________________________________________________________________
Date purchased
Name of store
_______________________________________________________________________
Owner's name
_______________________________________________________________________
Address
City
Printed in Turkey
Prov.
Postal code
6
Publicidad
Tabla de contenido
