Installing The Pc Viewer Program; Playback - D-Teg CX1000 Manual De Instrucciones

Installing the PC Viewer Program

The PC Viewer for Smarty CX1000 is in the micro SD card "pcsw" folder.
1. Plug in the micro SD card into your PC.
2. Open the "FHDREC1" drive
3. Open the "pcsw" folder and execute the "setup.exe" file.
4. Select your language and follow the on screen instructions.
5. The above icon will appear if installation is successful and you checked the
Box to create a desktop icon.
Uninstalling
To uninstall, make sure the program is not running. Click on the
Start Menu, then click on Control Panel. Select Uninstall and select
"PCViewer CX1000."
16

Playback

The data files generated by Smarty CX1000 are all encrypted to
safeguard personal information and can only be played back using the
PC Viewer. Once data is loaded, it can be transformed into the more
common AVI file by using the [Save to AVI] icon.
You must install the PC Viewer to view or use recorded data.
① Click the "Open" icon.
② Select the micro SD card drive.
NOTE : Select the drive and not the individual
folders within the micro SD card.
③
Click"OK"
④
to view or click "Check All" to
select all data files.
Downloading PC Viewer Program
To download the PC Viewer for CX1000, go to www.d-teg.com Click
"SUPPORT" and check the list under "Downloads" for the appropriate
software.
⑤ Click "Load"
to load selected
data.
Check the data files you wish
17
E