Tare Function - Aigostar 33LDF Manual De Instrucciones

NOTE:
Under the kcal display mode, press "MODE" o-
.
nce to check the weight.
The calorie function does not work in the TARE
.
function mode.

Tare function

Step 1: In weighing mode, put the container on the platform, the LCD
display will show the weight of the container.
Step 2: Press "TARE" to clear the weight of the container (reset to zero).
Then put the food into the container, the LCD display will show
the weight of food only. Repeat press "TARE" to weight more d-
ifferent foods.
Step 3: The LCD display will show the negative value of container if you
remove the food and container from the platform together. Please
press "TARE" again, the display will show zero in 2 seconds.