Digital Tuner Operations - Ground Zero GZCR 335BT Manual De Instrucciones

Setting
Long press SEL button to enter into main settings menu, Rotate Vol knob on front panel or press Vol+/-
buttons on remote control to choose the volume level 0-45.
Press SEL button repeatedly to choose between sub-settings: Rotate Vol knob on front panel or press
Vol+/- buttons on remote control to adjust the settings.
AF => IN VOL. => ADJ CLOCK => 24/12hour =>TA VOL => EON => PTY => REG => TEL
VOL => LOC (In radio mode only) => MONO (In radio mode only) => LOUD => SUBW =>
BEEP => DSP => EXIT
AF Set AF (Alternative Frequency) on/off.
IN VOL Adjust the initial volume level 0-45.
Rotate the Vol knob clockwise or press VOL+ button on remote control to
ADJ adjust minute and rotate the Vol knob anti-clockwise or press
VOL- button on remote control to adjust hour.
24 / 12 hour Turn the knob to choose 24 or 12 hour
TA VOL Turn the knob to adjust TA volume.
EON Turn the knob to adjust EON ON/OFF.
PTY Set (Program Type) on /off.
Choose REG on/off. When REG is enabled (on), the receiver accepts regional
REG variants of the tuned station with REG icon turned on. When REG is disabled
(off), the receiver ignores regional variants.
TEL VOL Turn the knob to adjust TEL volume.
Adjust LOC ON/OFF, when LOC is enabled, the receiver accepts regional
LOC
variants.
MONO Turn the knob to choose MONO ON/OFF.
Set Loudness ON/OFF. Default setting is OFF. The "LOUD" function makes it
possible to emphasize low and high frequencies through the push of a
LOUD
button in order to increase sound perception in an adjustment to the
respective volume.
Set SUBW ON/OFF. This function allows you to turn the RCA subwoofer
SUBW
output ON and OFF.
Set BEEP ON/OFF. When BEEP is on, press any key will make a beep sound.
BEEP
Default setting is OFF.
DSP Choose between POP => ROCK => CLASS => FLAT => NONE.
Mode Setting
Press MODE button TUNER => (* CD) => (* SD) => (*USB) => AUX => TUNER
(* available only if there is media device in disc, SD, USB slot)
Display
Press DIS button on remote control to see current tuning information and time.
In Radio mode, display menu:
Clock (clock time) => PTY => PS (program station) => Frequency => EXIT
GROUND ZERO
8
AUX jack
Intended to receive audio signals by connecting to external media player.

Digital Tuner Operations

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is
not available in you area, the following service is not available, either.
RDS overview
PI Program Identification code Code for identifying programs
Broadcast station name data expressed in
PS Program services name
alphanumerically characters.
Frequency list of broadcasting stations transmitting
AF Alternative Frequency
the same program.
Identification data for traffic information
TP Traffic program identification
broadcasting station.
Identification data showing traffic information is
TA Traffic announcement identification
being transmitted or not.
The "EON" function is an additional RDS service. If
the current program doesn't offer any traffic
announcements, EON automatically switches to the
traffic announcements on another program. After
Enhanced other networks
EON the end of the announcement, the device switches
information
back to the previously heard station. The readiness
for traffic announcements "TA" has to be activated
for this. To turn the EON function on or off, please
switch to the RDS menu.
Band selection
Press MODE button to select TUNER. Press BAND to select:
FM1 => FM2 => FM3 => AM1 => AM2.
When a new frequency band is selected, the last chosen frequency / station of that frequency band will
be heard.
Manual / automatic tuning
Manual tuning: To find a station, select a band first, then press and hold T-DN/T-UP buttons on remote
control until MANUAL appears on the display, then press these buttons repeatedly to search a station
upward or downward.
Automatic tuning: To find a station, select a band first, then press and hold T-DN/T-UP buttons on front
panel or short press T-UP/DN buttons on remote control, the automatic downward/upward search will
start. It will play when a station is found.
GROUND ZERO
9