Jabra CLIPPER Guia De Inicio Rapido página 5

EN
3 CHARGING YOUR JABRA CLIPPER
Make sure that your Jabra CLIPPER is fully charged before you start
using it for the first time. While charging, the battery indicator changes
from red to green when fully charged. Charging time is approximately
2hours. You can use the Jabra CLIPPER during charging. Please note:
The lifetime of the battery will be significantly reduced if your device is
left uncharged for a long period. Jabra therefore recommends that you
recharge your device at least once a month.
4 TURNING YOUR JABRA CLIPPER ON AND OFF
Press and hold the Multi-Function button until the LED turns green to
turn it on.
Press and hold the Multi-Function button until the LED turns red to turn
it off.
The headset will automatically turn off after 10 minutes if not connected
to a device.
5 PAIRING YOUR JABRA CLIPPER TO A PHONE OR
OTHER DEVICE
Headsets are connected to phones or other Bluetooth® devices using a
procedure called 'pairing' . By following a few simple steps, pairing can be
done in a matter of seconds.