Getting Started; Basic Operations - Prestigio PMSOW03 Manual De Instrucciones

Getting Started

Basic Operations

1. Slide Power Switch to ON position to turn on device. The Low
Power Indicator will stay on for 3 seconds when powered on.
2. The mouse device is now ready for operation.
3. Slide DPI Switch to toggle device DPI level between 800DPI and
1600DPI.
4. Press Reset Button to re-establish connection in case of
interference.
5. Press Internet Forward/Backward Buttons to return to the
previous page or skip to the next page.
6. Please replace batteries immediately when Low Power Indicator
stays on.
EN – 2
1. Remove Battery Cover.
2. Insert AAA Alkaline battery as
indicated. Please make sure tha
the positive (+) and negative (-
ends of battery match polarity
marks as shown.
3. Place the Battery Cover back
into place. Make sure it is
securely locked.
NOTE:
Click on any of the device buttons
to wake up device from sleeping
mode.
Establishing Connection
1. Press Receiver Release
Button to extract Receiver
from its storage slot.
2. Insert Receiver into one of
USB ports on PC or notebook.
3. The Receiver device is
auto-detected and installed.
The connection is now successfully
established.
Wireless Optical Mouse