Marmitek connect 410 Modo De Empleo página 4

ADVANTAGES
Connect410
• S uitable for simultaneously connecting 4 HDMI sources like set-top boxes, Blu Ray players
and game consoles to every HDTV or projector. You only need 1 HDMI input on your TV
and you never have to switch cables again.
• Supports all HDTV resolutions up to 1080p.
• W ith built-in repeater and equalizer for correcting any possible loss of signal, so you can
connect up to 15 metres of HDMI cable to the output.
• H igh quality 24K Gold Plated HDMI connectors to prevent transmitting- and corrosion
resistance.
• Free of interference because of the solid metal casing.
• Remote control included.
• This switcher can be stored invisibly using the optional IR receiver.
• Meets the HDCP standards (High-bandwidth Digital Content Protection)
HDMI V1.3
• V ideo bandwidth 225 MHz (makes image reproduction of 1080p, 12-bit and 60Hz
possible)
• D eep Color 12-bit (billions instead of millions colours, better reproduction of subtle
differences in gradation and a higher contrast ratio)
• Dolby TrueHD & DTS HD Master Audio (high quality audio support)
• Lip-Sync (prevents synchronisation problems between image and sound)
• CEC (operate multiple 'CEC' devices with just one remote control).
INSTALLATION
1. C onnect the HDMI cable to your screen (TV, monitor of projector) with the "HDMI
output" of the Connect410.
2. Connect the HDMI cables from your sources to the "HDMI inputs" of the Connect410.
3. C onnect the power adaptor to the power connector of the Connect410 and connect to
the mains.
Remark: Use only category 2 HDMI certified cables for the best quality in image and sound.
Remote control
Remove the plastic strip from the battery compartment to activate the battery and use the
remote control.
4 © MARMITEK