Calibration (Reset) Of The Chronograph - DETOMASO FIRENZE Manual Del Usuario

EN

Calibration (reset) of the Chronograph

This procedure should only be performed if the second hand of the chro-
nograph does not return to the zero position after the chronograph has
been reset or after battery change.
1. Pull out the crown to position 2.
2. Push button A or B to reset the second hand and minute hand of the
chronograph. Button B initiates a turn clockwise, button A counter
clockwise. Set the second hand and the minute hand of the chrono-
graph to the zero position. A short push will give you a step by step
advance whereas the hand can be advanced rapidly by continuously
pushing one of the buttons.
3. Now push back the crown into its normal position. The chronograph
has been successfully calibrated.
22