Publicidad
Installation
1 Pull out the external power cable, BNC cable and communications cable
(for connecting to the "camera") through the rear of the Wall Mount
Adaptor into the Pipe.
Then, it is recommended to keep the cables in a distance of about 100 mm from
the pipe.
2 Secure the Wall Mount Adaptor to the wall, corner or pole using the
"Anchor Bolts or Nuts (M10)".
When installing the product on a corner of the wall, use the Corner Mount Adaptor
(SBP-300KM) and use the Pole Mount Adaptor (SBP-300PM) for a pole.
When installing the product on a wall, mark and drill 4 holes into the Wall Mount
Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
Anchor Bolts
Wall Mount Adaptor
3 Mount the Camera set on the Pipe.
Install the camera according to the camera's installation guide.
Camera set
Product Specifications
•
•
Weight : 625g
•
•
Material : Aluminum
•
•
Operation temp. : -50°C~60°C
•
•
Operation hum. : 0~100%
•
•
Poids : 625g
•
•
Matériau : Aluminium
•
•
Température de fonctionnement :
•
-50°C~60°C
•
Humidité de fonctionnement :
0~100%
•
•
Gewicht : 625g
•
•
Material : Aluminium
•
•
Betriebstemperatur : -50°C~60°C
•
•
Betriebsluftfeuchte : 0~100%
•
•
Peso : 625g
重量 : 625g
•
•
Material : Aluminio
材質 : アルミニウム
•
•
Temp. funcionamiento : -50°C~60°C
動作温度 : -50°C~60°C
•
•
Hum. funcionamiento. : 0~100%
動作湿度 : 0~100%
•
•
Peso : 625g
•
•
Materiale : Alluminio
•
•
Temperatura di esercizio : -50°C~60°C
•
•
Umidità di esercizio : 0~100%
•
•
625g
무게 : 625g
•
•
재질 : Aluminum
•
•
사용 온도 : -50℃~60℃
•
사용 습도 : 0~100%
•
Product Outline
112
80
52
Hole:
11
625g
625g
: 625g
:
: -50°C~60°C
: 0~100%
207,5
Q/12JD5708
PT01-005156B
Publicidad
