Usingthetoothbrush
1. Remove the cap. (Fig. )
. Confirm that the brush is fixed firmly. (Fig. 8)
. Place the toothbrush in your mouth.
•
When using the toothbrush, especially with
toothpaste applied, place the brush head in the
mouth before operating to prevent splattering.
4. Press the power switch firmly to operate the
toothbrush.
•
Press the power switch firmly. If you press the
power switch lightly, the toothbrush may operate
only while you are pressing.
•
Press the power switch with the ball of the
finger.
•
Do not press with a fingernail. Doing so may
tear the rubber of the power switch.
5. Brush your teeth by moving the main unit by
hand.
•
Brush by moving the toothbrush in the same
way as when you brush by hand. Just applying
the toothbrush to teeth cannot fully remove
plaque, so it is recommended that you move the
toothbrush.
•
Do not apply the brush head to teeth or gums
too strongly.
6. When finished brushing, stop the motion by
9