Nom-Att; Last Mic On - AKG DMM 4/2/2 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE
NOTE
D D MM 4/2/2

NOM-ATT.

In NOM ATTENUATION mode the "OUT MASTER" rotary control is used to set the attenuation
by which the master signal is attenuated per connected input channel.
NOM ATTENUATION only works for channels that are set to AUTOMIXING mode!
With manual operation, NOM ATTENUATION would not make sense, since in this case all the
channels are connected and therefore a constant attenuation would be present.
The automatic mixing functions and the logic functions Force On and Force Off can affect this
mode!
With a clockwise rotation, the adjustment range extends from 0 dB to 3 dB, in increments of
1 dB. The adjustment takes place in the appropriate increments.
Figure 18: Division of the LED ring of the NOM-ATT function

LAST MIC ON

In LAST MIC ON mode you can set whether the most recently active microphone channel
remains open.
The function is set by turning the "OUT MASTER" rotary control. Turning the control clockwise
switches the function on, and the LED ring lights up completely. Turning the control counter-
clockwise switches the function off, and only one LED lights up.
Figure 19: LED ring when switching a function off/on
Pressing the rotary control also switches the function on or off.
Operation
45

Publicidad

Tabla de contenido
loading

Tabla de contenido