Publicidad
INTRODUCTION
Thank you for purchasing the RedSub BA-100 100W Bass Amplifier Head.
To help you get the most out of your new product, please read this manual carefully.
INSTRUCTIONS
INPUT – For connecting your bass guitar.
PASSIVE / ACTIVE SWITCH – For selecting which type of bass guitar you have.
GAIN – Controls the amount of bass guitar signal that goes into the amplifier.
CLIP LIGHT – Indicates when the signal has peaked.
TONE – Changes the tone of the amplifier, MIN boosts low end, MAX boost treble.
LOW – Adjusts the bass frequencies of the amplifier.
MID LEVEL – Adjusts the selected mid-range frequency of the amplifier.
MID FREQUENCY – Selects which area of the mid-range is boosted, 0 is low mid and 10 is upper
mid-range.
HIGH – Controls the treble frequencies of the amplifier.
PRESCENCE – Adjusts the upper mid-range of the amplifier.
BLEND – Blends the amount of FX signal coming from the effects loop.
MASTER – Adjusts the overall output of the amplifier.
AUX IN – Use this to receive connection from MP3 player, CD player, drum machine, etc.
HEADPHONES – Headphone output for the amplifier.
POWER – Turns the amplifier off or on.
PARALLEL OUTPUT – 2x Mono ¼" Jack outputs, maximum output 120w @ 4 Ohms.
BALANCED OUT – Sends out balanced signal from the amp via XLR.
EFFECTS LOOP RETURN – Connects to the output of an effects unit.
EFFECTS LOOP SEND – Connects to the input of an effects unit.
SPECIFICATIONS
OUTPUT POWER – 100w
MAX OUTPUT – 120w @ 4 Ohms
DIMENSIONS – 45cm x 23cm x 20cm
WEIGHT – 9kg
If you have any more questions about this product, please do not hesitate to contact the
Gear4music Customer Service Team on
+44 (0)330 365 4444 or info@gear4music.com
Publicidad
