Getting Started - TOMATIS INFINITE Manual De Instrucciones

GETTING STARTED

The Tomatis® Infinite headphones have been especially designed to be used with the TalksUp® professional equipment. The Tomatis® Infinite headphones have
two functions that are activated and managed autonomously and independently. The music listening function turns on and is set on the right speaker while the
audio-vocal training function turns on and is set on the left speaker.
Quick start of a music listening program (right speaker)
1
2
Quick start of the audio-vocal training (left speaker)
2
1
Begin with the music listening function
1. Make sure that the TF mode is turned on (right speaker, above the screen).
2. Press on the button to switch on the device (right speaker, bottom button).
3. To start, select the appropriate program and day, using the navigation buttons.
3
= Down
= Select
= Up
= On/Off, Back
Position the headphones and adjust the volume
Make sure you place the 'R' speaker on your right ear and the arch of
the headphones touches the top of your head.
Adjust the volume with the and
right speaker.
Begin with the audio-vocal function
1. Plug the microphone on the left speaker into the correct jack.
2. Turn on the microphone function using the
Position the headphones and adjust the volume
Make sure you place the «R» speaker on the right ear and that the arch of the headphones
touches the top of your head.
Position the microphone about 2 inches from your mouth.
Adjust the volume with the and
To return to the default volume, turn the device off and on again.
buttons located below the
button on the left speaker.
buttons located below the left speaker.
En
Volume +
Volume -
Volume +
Volume -
15