Classic Accessories Universal SL Snow Thrower Cab Instrucciones Y Cuidado página 7

STEP 4
INSTALL ASSEMBLED CAB ON LOWER MOUNTING POSTS (FIG. 1)
ADJUSTING SNOW THROWER CAB ANGLE (FIG. 2)
CAUTION: No part of the fabric cab skin should touch the engine or exhaust system of your snow thrower.
PARTS NEEDED
1
A
C
or
D
Lift up the cab and line up the center frame bar [A] with the lifter
bar [D]. Insert the lifter bar [D] into the center frame bar [A] until
the spring button pops through hole in the center frame bar.
OR
+
2 2
Once installed it may be necessary to adjust the cab to make it level. To do
this loosen the bolts on the mounting system and adjust the angle of the cab.
7
TOOLS NEEDED
1/2 in. Box
Wrench
OR
Adjustable
Wrench
OR
1/2 in. Socket
Wrench
UNIVERSAL SL SNOW THROWER CAB