Technibel K70D052Z Manual De Instrucciones página 9

Display Section
(Refer to the page II)
1. SETTING indication
Appears when the timer program is being set.
2. UNIT indication
Indicates the unit No. of the indoor unit which
is selected with the Unit Select button, or the
unit in which an abnormality occurs.
3. TIMER No. indication
Appears when the time program is being set.
4. Timer program
: The indoor unit starts operation at the
programmed time.
: The indoor unit stops operation at the
programmed time.
5. Today's day of the week
Indicates today's day of the week.
6. Program schedule indication
Appears under days that are scheduled for
program operation.
7. Present time
Displays the present time on a 24-hour clock.
Also also, displays settings in the various
setting modes.
8. TIMER OFF indication
Displayed when the timer has been turned OFF.
9. ERROR indication
Displayed when a mistake is made during
timer setting.
10. Outing indication (
Appears when the outing function is set.
11. Upper and lower limit indication of the
outing function
temperature
temperature
12. Operation Mode indication
Displays the selected operation mode.
(AUTO
FAN
13. Temperature indication
Indicates the set temperature.
14. ˚F / ˚C temperature unit indication
15.
Appears when the remote control sensor is
used.
16.
Appears when operated in centralized control.
If the remote control operation is not permitted
to the remote unit, when the Start/Stop button,
Mode Select button or Temperature setting
button is pressed,
change.
Outing function)
EG-3
: Indicates the upper limit of the
: Indicates the lower limit of the
/HEAT /DRY /COOL
).
Remote control sensor indication
Centralized control indication
flashes and rejects the
/
EG