Urbanbiker Viena Manual De Uso página 21

An error code is indicated by a span-
ner and a number. The number indi-
cates the respective error message.
Trip distance. To reset Press the but-
tons "M" and "-" 2 seconds
Press the "M" button to navigate through the menu and obtain the information.
ODO record. Trip distance. Trip time. To reset km, time and max. speed. Press
the buttons "M" and "-" 2 seconds
.
Display errors
0. Normal
1. Low battery voltage
4- Initial internal testing
5- High engine temperature
6- High controller temperature
7- Engine disconnected
15- Battery voltage too high
99- Disconnection between display
and controller
Press and hold the '+' and 'M' buttons
for 2 seconds to change the speed
from km/h to mph.
EN