Chicago Pneumatic CP84010 Manual Del Usuario página 3

EN
English
1. Technical Data
Technical Data
Unit
CP84010
Static coefficient test : 1.5 / Dynamic Coefficient test : 1.25
2. Application and Function
• This wheel dolly serves to support during mounting and/or removal of a truck wheel.
• The dolly is not to be used for transporting wheels over a long distance.
• Do not misuse the dolly.
• Please observe the product safety information!
3.Inspection – Scope of Delivery
Open the packing and check the equipment for transport damage and that all parts specified in the shipping documents are at hand. Before using the equipment
conduct a visual inspection in order to determine leakages, damages, loose or missing parts.
4. Assembly
Extract the unit with all its supplied parts. For assembly refer to drawing on page 3 (Fig.01).
5. Implementation and Operation
Removal: Position the dolly under the wheel to be removed. Loosen the wheel nuts and ensure that the wheel is carefully lowered onto the dolly. During transport
hold the wheel steady by hand (see Fig.03).
Mounting: Position the dolly with the wheel at the wheel hub, hold the wheel firm (see Fig.03), so that it cannot slip off. The wheel seat of the dolly is equipped with
rollers for positioning the rim on the hub.
6. Maintenance
• All moveable parts must be greased regularly with common multi-purpose grease. Always keep the unit clean and away from aggressive chemicals. Do not
leave the unit outdoors.
• Maintenance and repair of the equipment only by technical maintenance staff.
7. Disposal
The disposal of this equipment must follow the legislation of the respective country.
8. Please observe these safety precautions
To reduce risk of injury, everyone using, installing, repairing, maintaining, changing accessories on, or working near this tool must read and understand these
instructions before performing any such task.
Our goal is to produce tools that help you work safely and efficiently. The most important safety device for this or any tool is you. Your care and good judgement are
the best protection against injury. All possible hazards cannot be covered here, but we have tried to highlight some of the important ones.
• Before each use, check the dolly for leaks, cracked welds and for damaged, loose or missing parts; if any defects are found, do not use until repaired.
• Locate the load centrally on the dolly.
• Do not exceed the working load limit / rated capacity of the dolly.
• Only use dolly on hard level surfaces.
• Never lift people.
• Operators and maintenance personnel must be physically able to manoeuvre the dolly.
• Proceed with care in unfamiliar surroundings. Be aware of potential hazards created by your work activity.
• Any dolly that appears damaged, worn or has been subjected to abnormal load or shock, shall be removed from service until repaired.
• Read and understand instruction and parts book before servicing this product.
• Only qualified and trained operators should maintain this product.
• This product and its accessories must not be modified.
9. CE Certification
We : CHICAGO PNEUMATIC Tool Co. 1800 Overview Drive Rock Hill, SC 29730 - USA
Wheel Dolly
Declare that the product(s):
Machine type(s) : CP84010
Origin of the product : China
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to "Machinery" 2006/42/EC
(17/05/2006)
applicable harmonised standard(s) : EN 1494:2000 + A1:2008
Name and position of issuer : Bruno BLANCHET ( General Manager)
Place & Date : Saint-Herblain, 17/07/2012
Technical file available from EU headquarter. Bruno Blanchet General manager LLC CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain -
France
Copyright 2012, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part
numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Net weight Capacity
[kg] [kg]
14.3 250
Wheel seat Rim size
[mm] [Zoll]
240-570 6.5"-22.5"
Serial Number: From 00001 to 99999
CP84010
Wheel Dolly
3