Stuttgart 8515200 Manual Del Usuario página 6

TAKING PANORAMA PICTURES
PICTURE CAPTURE SUCCESSFUL
The LED display with the camera icon indicates whether the camera took the picture. If the
picture was captured successfully, it will light up once in blue. If the picture was not taken, it
will light up in red.
Picture capture successful
Make sure that the camera is switched on. Select the capture mode appropriate for the
situation:
USING THE PANONO STICK TO TAKE PICTURES
1. Open the camera cover and position the stick onto the threading so that the markings face
each other.
2. Push the stick into the threading and gently turn it clockwise.
3. Hold the stick in the air and release the trigger by pressing the button on the handle.
1. 2.
12 For more information visit support.panono.com
EN
Picture capture failed
3.
90° 90°
USING THE TRIPOD TO TAKE PICTURES
1. Attach the Panono Tripod Adapter to the camera in the same way as the Panono Stick.
Then tighten it on your tripod.
2. Connect your camera with the Panono App (see page 16).
3. Adjust to the desired picture settings and press the trigger button.
1.
TAKING PICTURES BY THROWING IN THE AIR
1. With two hands, throw the camera 1,5–4 meters into the air.
2. Make sure that it does not rotate too much in order to avoid blurring.
3. Catch the camera again with both hands.
To prevent damage, you should always catch the camera. Tips for throwing the camera can be
found on panono.com/go/support/throwing
TAKING PICTURES BY PRESSING THE TRIGGER BUTTON
Hold the ball in your hand and briefly press the trigger button.
EN
For more information visit support.panono.com 13