Bresser 9060100 Instrucciones De Uso página 15

PRODUCT INSTRUCTIONS
(1) How to provide power for DC12V appliances (such as a head lamp or fan) with this product?
Plug your appliances to the DC output port and press the power switch button to gain power. DC output rated
Current: 10A, Max output Current<13A.
Notices: Please confirm whether your DC12V appliance support charging with 5.5mm DC header interface
(The diametre of the DC Port of the Product is: 5.5mm/2.1mm), otherwise it is unable to connect with the DC
output, you can consult the electrical manufacturer, buy the corresponding adapter and connect with it.
WARNING!
Note: The DC output voltage has a range between 12V~16.8V, the maximum output current is 13A. DC output
voltage drops or increases while battery the capacity drops or increases due to the chemical characteristics of
the battery. If your appliance does not have a built-in input voltage stabilizing function, it may shut down when
the input voltage is too low or too high. If your 12V devices cannot work due to the input voltage being
too high, please read the device manual or consult the device manufacturer to get the input voltage
range of your device.
Protection Mode:
Short circuit/Overpower Protection: If the DC output is short circuited or overpowered (Load(s) power>150W),
the unit will shutdown to protect itself. Please resolve the problem and press the power button of the unit to
exit from the protection mode.
(2) How to provide power for AC appliances with this product?
Connect the power cable plug of the electrical appliance to the AC outlet of the product, long press the AC
power button for 3-5 seconds to turn on AC output, and the unit will start providing power to your appliance.
5.5mm DC12V for Fan or
LED lights
Charge 12V kits through
DC-Cigarette Lighter Adapter
(optional)
Limited Appliance Wattage<80W, Lamp, Electric Fan, TV, etc. AC will
shutdown when it's short circuited or power overloaded. Remove
the device and the unit will recover from short-circuit or overpower
protection in a few seconds. Repress the AC output button to switch
on AC output again.
15
EN