Setting The Time; Setting The Date - Zodiac 8371B Manual De Instrucciones

3 Hand with Date
(Automatic STP1-11, STP3-13)

Setting the time

1 . Unscrew (if necessary) and pull out crown to position 1 .
2 . Pull crown out to position III (the watch stops) .
3 . Turn crown until you reach the correct time .
4 . Push crown back to position I, and screw back (if necessary) .

Setting the date

1 . Pull crown out to position II (the watch continues to run) .
2 . Turn crown until yesterday's date appears .
3 . Pull crown out to position III (the watch stops) .
4 . Turn crown until correct date appears .
5 . Continue to turn crown until correct time appears .
6 . Push crown back to position I .
Do not change the date between the hours of 10pm and 2am. This is the time
when the movement is in position to carry out the automatic date change,
and any interference may cause damage to the movement.
2
3 Hand without Date
(Automatic STP1-11, STP3-13)
Setting the time
1 . Unscrew (if necessary) and pull out crown to position 1 .
2 . Pull crown out to position III (the watch stops) .
3 . Turn crown until you reach the correct time .
4 . Push crown back to position I, and screw back (if necessary) .
3