Proper Use And Operation - Reflexion MOBILSAT-1 Manual De Usuario

1-2. Proper use and operation

This product has been designed for portable use and fixed installation on vehicles with
maximum speeds of 130 km/h. It is designed to automatically aim an antenna at geostationary
television satellites.
The power to the system is supplied by a standard vehicle electrical system with a rated
voltage of 12 or 24 Volts DC. For installations where a main connection is provided, a suitable
230 Volt AC to 12 DC Volt power adaptor must be used.
Use of the equipment for any other purpose to the one specified is not permitted.
Please also note the following instructions from the manufacturer :
• It is not permitted to change the overall device by removing or adding individual components.
• The use of any other components to those originally installed is not permissible.
• Installation must only be performed by sufficiently qualified personnel. All instructions in the supplied Installation
Instructions, which is separately provided, must be carefully followed.
• The product does not require any regular maintenance. Housings and enclosures must not be opened. Checks
and maintenance work should always be carried out by a qualified specialist.
• For car mounting system, all of the relevant and approved guidelines of the automotive industry must be
observed and complied with
• The equipment must only be installed/operated on hard vehicle roofs/ground which are sufficiently strong and
inherently stable.
• Avoid to clean your vehicle with the mounted satellite system in a single-bay or drive-through car wash or with a
high-pressure cleaner..
3