Polygroup R801 Instrucciones De Montaje

Assembly and Shaping Instructions
ASSEMBLY: PLEASE READ COMPLETE INSTRUCTIONS BEFORE PROCEEDING.
The tree identification number is located on the end panel of the tree carton. Always refer
to this number in any communication concerning your tree.
1. Remove all parts from the carton. Separate the branches according to the number marking on the end of each branch.
Note: Branches are not shaped; refer to instructions on reverse for shaping.
2. Insert bottom pole into stand body with the tabs of the locking ring pointed toward the stand body. With the pole seated
firmly against the bottom of the stand. The pole is now locked into the stand. Insert the tapered end of the main pole into
open end of the bottom pole and cover poles with pole wrap by twisting pole wrap around the poles.
3. Place tree top in the top cap at the end of the pole and preshape the top (as noted on reverse), then remove and set aside.
Tree Top
6 Each #6
6 Each #8
6 Each #10
6 Each #12
6 Each #12
6 Each #14
8 Each #16
Pole Wrap
Branch Holder
Stand Body
4. Starting at the bottom row of the pole, follow instructions shown above to assemble the hinge clips to each
branch and place into appropriate branch holder. When installed correctly, the branch will pivot up and
down in a hinge like motion. Every tree style is shipped from the factory with the tips of each branch
compressed to the center wire. Each individual tip should be spread out separately. Tips should then be bent
slightly upward to add a more natural looking appearance. Refer to shaping instructions.
5. Place preshaped tree top in the top of the pole and complete the shaping.
6. When you take down your tree, you can either remove the branches from the holder and place them back into
carton for storage, or you can leave them assembled and fold the branches up for easy setup next year.
7. Keep out of reach of pets and children.
TZ66GN044X00
Branch Panel
Legs
SHAPE IT!
1
2
5
4
B.
SHAPE EACH ROW SO IT IS
EVENLY SPACED ABOVE
THE ROW BENEATH IT.
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at
01-800-461-0210 or visit our website at support.polygroupstore.com. One of our customer service representatives
will be happy to assist you.
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
3
C.
CONTINUE THIS UNTIL ALL ROWS
ARE CURVED UP AND OUT. SHIFT
TIPS TO FILL ANY GAPS FOR A
UNIFORM LOOK.
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
SIDE VIEW
NOTE:
THE USE OF MINIATURE
LIGHTS ON YOUR TREE IS
RECOMMENDED. FULL SIZE
LIGHTS GENERATE EXCESSIVE
HEAT WHICH COULD
DISTORT BRISTLE WITH
PROLONGED CONTACT.
R801