LABBOX LACH-040-001 Instrucciones De Montaje

INCLUDED PARTS:
Before the assembly, please make sure that all the following parts are included in the
package:
-Backrest with metal plate, small knob - 1 set
-Seat with metal plate - 1 set
-Mechanism / central stick with a long button - 1 set
-Column / Protector - 1 piece
-A base of five branches - 1 piece
-Landslides - 5 pieces
ASSEMBLY INSTRUCTIONS
1. Fix the slides (1) inside the base of five branches (2).
Attach the center pole (3) to the hole in the base (2).
Attach the protector (4) to the center pole (3). ATTENTION!
2. Insert the seat back fastening element (6) into the guides on
the seat leaf (5) and secure it with a long button.
3. Unscrew the smallest knob on the backrest (7), insert the seat
back fastening element (6) and screw the knob one more time.
4. Backrest (7) mounted with a seat (5) placed on the pin of the
column (4).
5. Adjust the seat and backrest height and fasten the adjustment
screws.