StetSom HIGH LINE HL800.4 Manual De Usuario página 13

Tips for adjusting the input signal:
• On the Radio/MP3 Player, turn on any musical signal and set the volume to
80% of the maximum. For example: if the maximum volume of the Radio/MP3
player is 45 (100%), set to 36 (80%).
• On the amplifier, put the LEVEL at the lowest setting and increase gradually
until you notice the sound distorting.
• Slowly lower the LEVEL until you no longer hear distortion in the sound.
Audio output and power
5. OUTPUT CONNECTOR (SPEAKERS):
signal. Be careful to maintain the correct polarity of the speaker connections
and check the minimum output impedance in the technical specifications.
6. POSITIVE POWER SUPPLY CONNECTOR:
terminal using cables with a gauge recommended for the purchased model.
Always use a fuse compatible with the consumption of the product
closest to the battery to protect the electrical part of the vehicle.
7. REMOTE CONNECTOR (REM):
when turning on the radio/player. Connect to the remote output of the
radio/player mininum of 18 AWG.
8. NEGATIVE POWER SUPPLY CONNECTOR:
terminal using cables with a gauge recommended for the model purchased.
5 6 7
FRONT and REAR outputs with stereo
Allows automatic activation of the amplifier
13
8 5
Connect to the positive battery
Connect to the negative battery