Technical Information; Proper Use; Safety Advice; Working Safely - Kompernaß Lervia KH 368 Instrucciones Para El Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
Operating instructions for the Lervia KH 368 car waxer/polisher

Technical information

Model number:
Operating voltage:
Power consumption:
No load speed:
Sound pressure level:
Vibration:
Overload fuse

Proper use

The car waxer/polisher is intended exclusively for waxing and
polishing/dewaxing of ordinary vehicle paintwork. Any other
use or modification shall be considered as improper use and
could give rise to considerable dangers. The tool is not
intended for commercial use.
Controls
Switch

Safety advice

BEFORE USING YOUR CAR WAXER/POLISHER FOR THE
FIRST TIME, TO AVOID DAMAGE TO PROPERTY OR
PERSONAL INJURY PLEASE MAKE YOURSELF FAMILIAR
WITH THE SAFETY ADVICE AND OPERATING
INSTRUCTIONS.
8
GB
KH 368
230V ~ 50 Hz
230W
n = 3000 rpm/orbital
0
80 dB(A)
14 m/s
2
To avoid danger to life from electric shock:
·
Do not operate the tool if it has a damaged mains lead or
plug. Have any tools or mains leads that do not work properly
or are damaged examined and repaired at a service centre.
The service centre for your country can be found on the
guarantee card.
·
Do not leave the tool out in the rain and never use it in a
moist or damp environment. Make sure that the tool's mains
lead never gets wet or damp during operation.
·
Any broken or damaged parts must be replaced with original
spare parts only.
To avoid danger of injury:
·
Never leave the tool unattended whilst working.
·
Always keep your working area clean.
·
Caution! Keep the mains lead and the tool out of reach of
children. Children often underestimate the dangers associated
with electrical equipment.
·
Do not use the equipment near inflammable liquids or
materials or explosive gases.
·
Before you clean the tool or fit accessories, always pull out
the mains plug from the socket.
·
Make sure that the tool cannot be inadvertently switched on.

Working safely:

·
If danger arises, pull the mains plug immediately out of the
mains socket.
·
Never use the tool for a purpose for which it was not
intended.
·
Remain alert at all times! Always watch what you are doing
and proceed with caution. Never use the tool if you cannot
concentrate or you are feeling unwell.

Publicidad

Tabla de contenido
loading

Tabla de contenido