General Info; Installation And Configuration - Perenio Power Link Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8

GENERAL INFO

Article
Integration
Specification
1
Scope of Supply
Warranty

INSTALLATION AND CONFIGURATION

1. Unpack the Power Link device, plug it into the mains socket and power on (Push the Power Button and wait
until the LED flashes green).
2. Activate the device in the Perenio Smart
Home/Yandex Smart Home
3. Set timers and/or create operating scenarios in the mobile application.
SAFETY OPERATION RULES
The device may be connected to the power supply, if the main voltage matches the value in the device
specification. The device must be connected directly to the mains socket. Do not connect it to other plugged in
smart plugs. It is not allowed to drop, throw or disassemble the device, as well as attempt to repair it on one's
own or use it in case of visible damage or defects.
TROUBLESHOOTING
1. The LED does not light up: Check that the device is plugged in and powered on, otherwise contact our Support.
2. Timer settings disappeared: Reset to factory settings was performed. Reconfigure the smart plug.
3. The Power Link device changes status to "offline" unexpectedly: Power supply failure, or the smart plug is
out of the ZigBee/Bluetooth coverage.
1
This device is for indoor installation only.
2
All information contained herein is subject to amendments without prior notification of the User. For current information
and details on the device description and specification, connection process, certificates, warranty and quality issues, as well as the
Perenio Smart app functionality, see
perenio.com/documents. All trademarks and names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured by Perenio IoT spol s r.o. (Na Dlouhem 79,
Ricany - Jazlovice 251 01, Czech Republic). Made in China.
3
Make sure that the Perenio® Control Gateway or the IoT Router was pre-installed and connected to the network via Wi-
Fi/Ethernet cable. Log in to your user account, click on the "+" icon and follow connection tips specified on the screen.
4
The Power Link device must be switched to the MFi Mode, so press and hold the Reset Button of the smart plug until its LED
Indicator starts blinking fast. Wait for the LED Indicator to stop blinking and flash blue.
5
For Google Home and Yandex Smart Home applications, the Power Link must be first activated in the Perenio Smart app.
Doc Date: 12/11/2020
©Perenio IoT spol s r.o.
All Rights Reserved
PEHPL01/PEHPL03 (white), PEHPL02/PEHPL04 (black)
Apple HomeKit, Google Home & Yandex Smart Home (Alice)
ZigBee 3.0/Bluetooth (MFi), 240VAC, 16A (4,000VA max), 0.5W, 50/60Hz,
2.4GHz, IP20 Protection Class, plug type E/F, socket type C/F, LED indicator,
protective shutter, automatic power cutoff, overvoltage, overload and overheating
protection, monitoring of voltage, current and power, timers and schedules.
Operating conditions: 0°C to +40°C, up to 75% RH (non-condensing)
Power Link, Quick Start Guide, Warranty Card, Sticker
2 years (Service life: 2 years)
2
5
app, if required.
relevant Installation and Operation Manuals available for downloading at
Version: 3.0.0
3
app or the Apple HomeKit
4
app, and add it to Google
1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Power plugPehpl01Pehpl04

Tabla de contenido