Get To Know Your Wine Cooler; Before Use - Blomberg WSN 1412 LT Instrucciones Para El Uso

Get to know your wine cooler

Before use

Before operating your new appliance, please read the following instructions
carefully as they contain important information on safety, installation, operation
and maintenance. Keep the instructions for future reference.
On receipt, check to ensure that the appliance has not been damaged during
transport. Transport damage should be reported to the local distributor before
the wine cooler is put to use.
Remove the packaging. Clean the inside of the cabinet using warm water with
a mild detergent. Rinse with clean water and dry thoroughly (see cleaning
instructions). Use a soft cloth.
If during transport the appliance has been laid down, or if it has been stored
in cold surroundings (colder than +5°C), it must be allowed to stabilise in an
upright position for at least an hour before being switched on.
Lighting
Charcoal filter
Wooden shelf
Sealing strip
Nameplate
Door handle
Kick plate
Control panel
Lock
Adjustable feet
Fig. 1
3