Troubleshooting - SprayTECH CAPspray CS5100 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Restricted air flow or no air
flow
The turbine has no power
Excessive arcing/sparking in
the turbine
These products are covered by one or more of the following U.S. patents:
5,423,395
D322,790
5,556,255
5,639,222
SprayTECH 30-Day Satisfaction Guarantee
If, within a 30-day period from the date of purchase, you are not totally satisfied with a SprayTECH/CAPSpray unit, you
may return it for full credit toward another SprayTECH or CAPSpray product of equal or greater value.
© 1999 SprayTECH Corporation. All rights reserved.

Troubleshooting

Cause
1. Air flow adjustment knob on the spray
gun is turned off
2. Air filters are clogged
1. No power at the power supply
2. The fuse is blown
3. Worn turbine brushes
1. Worn turbine brushes
2. Damaged commutator
Patents
5,181,832
5,702,131
Solution
1. Adjust the air flow adjustment knob
2. Clean or replace the filters
1. Check the power supply
2. Check and replace the fuse
3. Have the brushes replaced at an authorized
CAPSpray service center
1. Have the brushes replaced at an authorized
CAPSpray service center
2. Replace the turbine (contact a CAPSpray
service technician)
D338,208
5,174,610
5,558,492
5,573,371
5
5,550,336
D365,569
5,772,711
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Capspray 0277032

Tabla de contenido