Owens Corning VentSure VTS572 Guia De Inicio Rapido

VTS572
Product Benefi ts:
• Available with either standard fl ange
or extended fl ange
• Low profi le for enhanced aesthetics.
• Allows outside air to fl ow naturally
upward and out of attic.
• Promotes a cooler, drier attic.
• Helps prevent moisture from being
trapped in insulation, structural
wood, shingles and roof deck.
• Helps prevent rotting, mildew,
drywall damage, peeling paint and
warped siding.
• Helps increase the performance of
your roof.
• Works year-round for consistent
ventilation without energy
consumption.
®
VentSure Low Profi le Slant Back Roof
Vent with Exterior Louver
Salida De Ventilación De Perfi l Inclinado VentSure
Required Ventilation:
• As a general rule, one square foot of
net free vent area per 300 square feet
of attic fl oor or area to be vented is
recommended.
• In the rare situation where no vapor
retarder is used and/or proper
distribution of soffi t and ridge vents
cannot be achieved, one square
foot of net free vent area should be
provided for each 150 square feet of
attic fl oor or area to be vented.
• For a balanced system, ventilation
should be equal at the undereave
and ridge.
• In cases where a balanced system
cannot be achieved, always provide
more than 50% of the total required
ventilation at the undereave and the
remainder at the upper portion of
the roof.
®
VTS572EF (Extended Flange)
Product Specifi cations
Especifi caciones Del Producto
Color/
Finish Model No. Color
MLGV VTS572
BKGV VTS572 Black
WHGV VTS572 White
BRGV VTS572 Brown
LGGV VTS572 Light Gray 414048
DGGV VTS572 Dark Gray 414049
MLGV VTS572EF
BKGV VTS572EF Black
WHGV VTS572EF White
BRGV VTS572EF Brown
LGGV VTS572EF Light Gray 428748
DGGV VTS572EF Dark Gray 428749
Galvanized
Pcs./Ctn 10
Ctns./Pal 12
Pallets/Truck 26
Pcs./Truck 3,120
Base 32" x 23¼ "
Height 2¼ "
Opening 11"
Slope 3/12" or Greater
NFVA Sq. In. 72
Long/ Short/
Carton Piece
UPC UPC
Code Code
Mill 413821 VS73
413822 VS71
414043 VS72
414046 VS74
VS75
VS76
Mill 428744 VS81
428745 VS82
428746 VS83
428747 VS84
VS85
VS86
Extended Flange
10
8
28
2,240
36" x 27¼ "
2¼ "
11"
3/12" or Greater
72