Ariston A-MW09-HBX Manual De Instrucciones página 20

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
REMOTE CONTROL - BUTTONS AND MAIN FUNCTIONS
UK
N.B. The Unit beeps to confirm receipt
of the command signal each time a
button is pressed.
For the correct operation
of the remote control:
- make sure there are no obstructions
- do not drop the remote control
- the remote control signal can be recei-
ved at a distance of approximately 10 m
- do not leave the remote control directly
exposed to sunlight (risk of damage to
the components).
ATTENTION:
Never leave the remote control within
children's reach. (Risk of damage to
the appliance due to improper use).
20
All manuals and user guides at all-guides.com
ON/OFF BOTTON
Press it to turn the air conditioning unit on and off.
The word OPER appears on the display when the remote control is on.
MODE BOTTON
Selects the operating mode, according to the following sequence:
AUTO (automatic operation)
(cooling)
(dehumidification)
(ventilation)
(heating)
Temp-Up/Temp-Dn BOTTON
Use these buttons to set the desired temperature to between 16°C
and 30°C. The temperature increases or decreases as you press
or Temp-Up/Temp-Dn respectively.
SWING BOTTON
Pressing this button once enables or disables the movement of the
directional flaps.
Pressing the button twice in quick succession switches the command
panel display backlight on or off.
FAN BOTTON
Use this button to Select the fan speed, according to the following
sequence:
(low)
(medium)
(high)
(automatic)
AUTO
SLEEP BOTTON
With this function enabled, the air conditioning unit adjusts the tem-
perature automatically in order to make the room more comfortable
at night, thereby saving on energy.
T-ON BOTTON
Programmes the timed starting
T-OFF BOTTON
Programmes the timed stopping
CANCEL BOTTON
Cancels any T-ON and T-OFF settings.
CLOCK BOTTON
To set the correct time
RESET BOTTON
To restore the initial settings
N.B. The Unit beeps to confirm receipt of the command signal each time a
button is pressed.
For the correct operation
of the remote control:
- make sure there are no obstructions
- do not drop the remote control
- the remote control signal can be received at a distance of approximately 10 m
- do not leave the remote control directly exposed to sunlight (risk of damage to the
components).

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido