Blauer. H.T. BRAT Manual De Instrucciones página 8

The front air intake allows air to enter onto the upper part of the
head and thus renew the air in the head section. The channels
incorporated in the internal shock absorbers facilitate the
circulation of air over the surface of the head. The position of
the upper ventilation system is designed to optimise the
effectiveness of this ventilation.
Opening / closing front vent: The ventilation is in the open
position when the large button is pushed backwards (1) and closed
when the big button is pushed forwards (2)
1
Visor mechanism system.
3
Dismantling: using a small screwdriver, lift the protective cover "HI.TECH H.T." and extract it carefully (1). Unscrew the
screw and extract it (2). Remove the visor fixing plate (3) and extract the visor (4).
Assembly: place the visor on the helmet and position the visor fixing plate (5)
(6) and fix the assembly with the screw
(7). Clip the protective cover «HI.TECH H.T. (8). Check the operation of the visor before use.
3
1
button
2
button
2
4
open
closed
open
closed