Led Indicator - Petsafe Smart Feed PFD19-16861 Guia De Inicio Rapido

LED Indicator

Light Color and Pattern
Yellow Blinking
Yellow Solid
Blue Blinking Slow
Blue Blinking Fast
Blue Solid
White Blinking
White Solid
Red Blinking
Red Solid
Reboot / Reset Button
A reboot tries to reconnect the feeder to your Wi-Fi while saving all the programmed meals and settings.
1. Use the end of a paper clip to press and hold the reboot/reset button for 3 to 5 seconds until the LED blinks white
to show a successful reboot.
2. If the feeder successfully reconnects to your Wi-Fi with internet, the LED will blink blue and then it will turn solid to
show that it is fully connected and operational.
A reset deletes all the programmed meals and settings and it returns the feeder to setup mode.
1. Press and hold the reboot/reset button with the end of a paper clip for 8 or more seconds until the LED is solid
white to show a successful reset.
2. The LED will then blink yellow to show that the feeder has returned to setup mode.
8
What It Means
Feeder has power and it is in setup mode.
Smartphone is connected to the feeder in setup mode.
Feeder is connected to Wi-Fi, but there is no internet.
Feeder is trying to connect to Wi-Fi or it is offline.
Feeder is connected to Wi-Fi with internet and it is fully operational.
Reboot mode which triggers the feeder to attempt to reconnect to your Wi-Fi
without losing the programmed settings.
Factory reset mode which deletes all programmed settings and returns the
feeder to setup mode.
Wi-Fi credentials failed during setup.
Mechanical error such as a jam or a motor issue.
petsafe.com