Beper 90.820 Manual De Instrucciones página 6

Electric Hot Plate Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Use advice
Never leave oil and fat to be heated without supervision.
Do not touch the surface of the plate when the appliance is in use or getting hot.
The plate has been manufactured only for heating or cooking food.
It is recommended to use the plate when the fry pan is already placed on it.
Do not use the appliance in open space/outdoors.
Pans to use
For the most efficient use of your hot plate, the cooking utensils used should be with a solid base and be as even
as possible, with a diameter of about 18mm to 20mm, and a maximum quantity of 12 L.
How to use the hot plate
When using the hot plate for the first time, connect the plug to the socket and turn the temperature knob to the
highest temperature setting for 3-5 minutes to remove dust that may have accumulated during manufacturing
or storage.
Turn the hot plate on by rotating the temperature knob clockwise. When the light indicator turns on, the hot plate
starts heating.
There are 5 cooking levels as follows:
1. For slow cooking, delicate foods, or thickening sauces, etc.
2. For simmering food in big quantities
3. For meat stir-frying
4. For high temperature cooking
5. For boiling
The light indicator turns off automatically when the hot plate reaches the selected temperature. A built-in tempe-
rature control device helps maintaining the desired temperature.
Do not use the appliance continuously for more than one hour.
When the appliance is not in use, set the knob at the lowest level (0) and disconnect it from the electric socket.
Leave the appliance cooling down before storing.
Cleaning
Turn off the appliance and disconnect from the socket. Then clean with a lightly damp cloth or with a non abra-
sive detergent.
Specifications
Power: 1500 W
Power supply: 220-240V ~ 50/60 Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
6